Hello!. I'm trying to get a file from ecu 17cp 46 sprinter 519 cdi bluetec. The ecu can't unlock. I use clone Kess v 2 and ktag. the ecu number is a 6429000001 bosch 0281018932. do you know how i can unlock it? Thanks
↧
Sprinter 519 cdi bluetec EDC17CP46 Ktag clone
↧
A QUESTION FOR GOLF MK5
Hi to all friends
A client has a golf MK5 Diesel
It works very well but it has not good start when drive
I read that it will be OFF the DPF
is it true?
If yes what tool do i need to read it and turn it OFF?
Thank you very much
God Bless you
A client has a golf MK5 Diesel
It works very well but it has not good start when drive
I read that it will be OFF the DPF
is it true?
If yes what tool do i need to read it and turn it OFF?
Thank you very much
God Bless you
↧
↧
I Need PIN Code For Peugeot 106 [SOLVED!]
Please, PIN for Peugeot 106.
VIN: VF3xxxxxxxxxxxxxx
Thanks!![yes]( "yes")
VIN: VF3xxxxxxxxxxxxxx
Thanks!
↧
Auris 2008 1.6 Wiring Diagrams Help
Hi All
Could any one please help me with the wiring diagram and fuses/relay location for the Engine ECU I have this vehicle in as Non Runner and No Communication with the Engine ECU the Vin Number is as follow SB1KV56E30F050984.......
When the ignition is put to ON position I get message on dash Check Steering Power and NO Cranking, is there any thing common think or place to look at it
Thanks
Could any one please help me with the wiring diagram and fuses/relay location for the Engine ECU I have this vehicle in as Non Runner and No Communication with the Engine ECU the Vin Number is as follow SB1KV56E30F050984.......
When the ignition is put to ON position I get message on dash Check Steering Power and NO Cranking, is there any thing common think or place to look at it
Thanks
↧
How to disable Alam on Jaguar S-Type R6 2001 key locked in the boot, and doors opened
Hello,
I have locked my keys (the only one) inside the boot of my Jaguar S-type R6 2001 series,
I have injected the 12V (13V) from a 100A battery from the front box in the bonnet,
but no way to open the boot, as the alarm is on.
For example I can open the gas tank access hatch.
But there is no way to release the boot with the interior button.
In fact when I open the doors the alarm is hitted.
So I think I have to disable it before I can open the boot.
The Question is how do I disable the alarm?
Or how do I access the boot from the rear seat of the car?
Or how do I unlock the drivers doors without the key?
Please help
I am blocked in the bush
Regards
I have locked my keys (the only one) inside the boot of my Jaguar S-type R6 2001 series,
I have injected the 12V (13V) from a 100A battery from the front box in the bonnet,
but no way to open the boot, as the alarm is on.
For example I can open the gas tank access hatch.
But there is no way to release the boot with the interior button.
In fact when I open the doors the alarm is hitted.
So I think I have to disable it before I can open the boot.
The Question is how do I disable the alarm?
Or how do I access the boot from the rear seat of the car?
Or how do I unlock the drivers doors without the key?
Please help
I am blocked in the bush
Regards
↧
↧
Renault Re-Prog CD V179 (7.2019) + Re-Prog Guide
Hello to all Renault Fans ![heart]( "heart")
& AP Members... ![hi]( "hi")
Here it is the LATEST Version about the Renault Re-Prog CD, Version 179 (7.2019)![koko]( "koko")
Also i covering the common & famous OFFICIAL Re-Prog Procedure Manual (ENG), for those who's they DON'T know
HOW they will use this CD, and general HOW they will make Re-Prog on those Renault ECU's witch supporting...![smile]( "smile")
Gooooooooooood luck ppl!![yes]( "yes")
Best Regards!![cheerleader]( "cheerleader")
![auto-professionals.co.uk]( "auto-professionals.co.uk")
& AP Members... 
Here it is the LATEST Version about the Renault Re-Prog CD, Version 179 (7.2019)
Also i covering the common & famous OFFICIAL Re-Prog Procedure Manual (ENG), for those who's they DON'T know
HOW they will use this CD, and general HOW they will make Re-Prog on those Renault ECU's witch supporting...
Gooooooooooood luck ppl!
Best Regards!
| Renault Reprog CD Version 179 (Mega).txt | ||
| File Type: |
 |
 |
| Downloaded: | 0 times | |
| Size: | 152 bytes | |
↧
I Need PIN Code For Peugeot 307
Hello.
Could I please have a pin code for a Peugeot 307?
VF33CRFNF83064871
Thanks.
Buck
Could I please have a pin code for a Peugeot 307?
VF33CRFNF83064871
Thanks.
Buck
↧
Vauxhall Combo-D 2015 1.3 CDTi Running Problem
Hi all.
I have Combo-D, it starts and ticks over but when apply throttle at about 2000 rpm engine starts to hunt, revs rise and fall even if you hold throttle pedal steady.
There is no fault codes.
Vehicle details:
2015 Combo-D
Engine 1.3 Diesel, Code A13FD
Any help appreciated.
Many thanks.
Tony
I have Combo-D, it starts and ticks over but when apply throttle at about 2000 rpm engine starts to hunt, revs rise and fall even if you hold throttle pedal steady.
There is no fault codes.
Vehicle details:
2015 Combo-D
Engine 1.3 Diesel, Code A13FD
Any help appreciated.
Many thanks.
Tony
↧
Citroen c4 grand picasso 2008 RHD non start
Rhd
1.6 hdi
Engine code 9hz
Car is automatic got padels on steering wheel
Non start even woth immo turned off and another ecu bsi and matching key
Chuck's the Delphi diagnostics out
And sent diagbox stupid can't even get to faults
Can network seems to be ok
It xame in the garage running had a fault of fuel rail pressure
Someone changed it
They removed batter and the battery trey to gain access to it. And i think airbox as well
And now it will not even attempt to start
On the dash display right next to the fuel symbol there a little key symbol with something else next to it. Cant find nothing on google of what this means
The car it selfs know there is a key pressent as it will chime whem you open the door
If you try to you the wrong key it will flash up anti theft fault.
So this tells me no issue with keys
And just for the record i have had the wiring out next to battery and above the battery at back of bulk head as i know they suffer with water ingress .
This has puzzled me
1.6 hdi
Engine code 9hz
Car is automatic got padels on steering wheel
Non start even woth immo turned off and another ecu bsi and matching key
Chuck's the Delphi diagnostics out
And sent diagbox stupid can't even get to faults
Can network seems to be ok
It xame in the garage running had a fault of fuel rail pressure
Someone changed it
They removed batter and the battery trey to gain access to it. And i think airbox as well
And now it will not even attempt to start
On the dash display right next to the fuel symbol there a little key symbol with something else next to it. Cant find nothing on google of what this means
The car it selfs know there is a key pressent as it will chime whem you open the door
If you try to you the wrong key it will flash up anti theft fault.
So this tells me no issue with keys
And just for the record i have had the wiring out next to battery and above the battery at back of bulk head as i know they suffer with water ingress .
This has puzzled me
↧
↧
Iprog Pro vs Diatronik what is your input?
I'm looking for a tool to help with Airbag and mileage with better turn around time, like threw OBD2. The two that I have been looking at are Iprog Pro Original and the Diatronik any other suggestions are welcome. What I'm look for is value for my money but not looking for cheap and unprofessional tools but also a tool that's not going to brake the bank ever year on updates and extras like smok. I have read good reviews on the Diatronik with updates been free which is a big plus but is this chinese junk tool? The Iprog Pro looks very nice but I see it adds up with all the adaptors, also what is the price on updates on this unit. Just looking for some advice from AP members before I spend any ![cash]( "cash")
![cash]( "cash")
. Thanks
. Thanks
↧
Hyundai J2534 Programming Software V2.01.02
Hey guys!
Again I had to buy latest J2534 programming software from hyundai... 75$ US.
software is for North America.
as per Hyundai version is from 07.2019
v2.01.02
Need a J2534 and internet connection to use. easy as 1-2-3 to install and to use.
good luck y'all!!![muscle]( "muscle")
Again I had to buy latest J2534 programming software from hyundai... 75$ US.
software is for North America.
as per Hyundai version is from 07.2019
v2.01.02
Need a J2534 and internet connection to use. easy as 1-2-3 to install and to use.
good luck y'all!!
| J2534HMA_v2.01.02_Setup.part1.rar | ||
| File Type: |
 |
|
| Downloaded: | 0 times | |
| Size: | 5 MB | |
↧
Ford Taurus 2008 AirBag Crash Data Clear
Need help to clear crash data
2008 Ford Taurus
8G13-14B321-AD
2008 Ford Taurus
8G13-14B321-AD
| ori.rar | ||
| File Type: |
|
|
| Downloaded: | 0 times | |
| Size: | 1.73 KB | |
↧
X-Tool X100 Pad 2 Pro Special Functions Expert With KC100 Feedback's
Hi.
Can somebody please give some feedback for the above tool as I am thinking of buying one?
I am looking more in to Immo and Key Programming side (mostly for VAG 4th & 5th Immo generation) so need to know how good it is...
Also any other in puts regarding this tool would be great help...
Can somebody please give some feedback for the above tool as I am thinking of buying one?
I am looking more in to Immo and Key Programming side (mostly for VAG 4th & 5th Immo generation) so need to know how good it is...
Also any other in puts regarding this tool would be great help...
↧
↧
Mitsubishi CAN PassThru Tool On-Line Purchase
Hello friends.
Any suggestions on how I can purchase this software?
Any suggestions on how I can purchase this software?
↧
Honda Civic Type R 2007 VTEC Noise From Top End
Hi all.
I have another problem.
Got Honda Civic Type R year 2007, customer has replaced VTEC actuator because of fault code he read, he cannot remember the code.
Car has sound from top of engine, it is not tapping or knocking, more like droning sound.
When car is driven at 4.000 rpm noise gets louder and car will not rev anymore,
i have code read but has no codes in at moment.
I am looking for information on cams, timing VTEC units like workshop manual.
Engine code: K20Z4
Many thanks.
Tony
I have another problem.
Got Honda Civic Type R year 2007, customer has replaced VTEC actuator because of fault code he read, he cannot remember the code.
Car has sound from top of engine, it is not tapping or knocking, more like droning sound.
When car is driven at 4.000 rpm noise gets louder and car will not rev anymore,
i have code read but has no codes in at moment.
I am looking for information on cams, timing VTEC units like workshop manual.
Engine code: K20Z4
Many thanks.
Tony
↧
TRAFIC III speed limiter
Hello. I have trafic3 and need to set speed limiter. I had this option in trafic 2 and want to set in trafic3 but how? car has cruise control and manual speed limiter but i need to set it by diagnostic unit for maximum speed 130km/h maybe anyone know what i can do it with CLIP?
↧
2 second warning lamp circuit
If you want a low power lamp to go out after about 2 seconds you can use the circuit attached.
It will even run off the power to the lamp you want to go out
I'm sure you creative thinkers will find a use![koko]( "koko")
It will even run off the power to the lamp you want to go out
I'm sure you creative thinkers will find a use
| 2-Second-light.JPG | ||
| File Type: |
 |
|
| Downloaded: | 11 times | |
| Size: | 36.56 KB | |
↧
↧
Toyota Avanza Airbag Clear Crash
I have a Toyota Avanza 89170-BZ440 with a R8C R5f2154AE. If someone can help me to remove the crash data on my file please.
Thanks guys I have come right will share file tonight for all.
Thanks guys I have come right will share file tonight for all.
| toyota avanza airbag.rar | ||
| File Type: |
|
|
| Downloaded: | 0 times | |
| Size: | 42.67 KB | |
↧
Egr off vw caddy 2006 tdi 105 cv
Hello i need EGR off for this file .
dtc p0403.
hi caddy 2006 edc16 thank yous.
dtc p0403.
hi caddy 2006 edc16 thank yous.
| Vw caddy 0281012390.rar | ||
| File Type: |
|
|
| Downloaded: | 0 times | |
| Size: | 49.2 KB | |
↧
Audi A4 B8 2013 Sedan Tail LED Lamps USA To EU Conversion
Hi,
Need help with Audi A4 B8 2013 year.
I bought original lights EU, anybody knows how to do it?
What need to change in wires?
What need to do with coding?
Need help with Audi A4 B8 2013 year.
I bought original lights EU, anybody knows how to do it?
What need to change in wires?
What need to do with coding?
↧