Quantcast
Channel: Auto-Professionals - All Forums
Viewing all 7485 articles
Browse latest View live

VW Polo 6R 1.6 TDI Won't Start

$
0
0
Hi everyone,
I need your experience in my issue.

Last week a VW Polo 6R 1.6 TDI CAYB DSG arrived in safe mode (BUT working) condition with fault code:
7462 - EGR Valve (N18)
P0403 00 [101] - Malfunction

Customer brought me a used one EGR and after installation I have new fault code with both EGR solenoids:
7343 - EGR Sensor 2
P0407 00 [032] - Signal too Low

After testing the wiring, plugging-unplugging and swapping EGR solenoids trying to find the problem, the car won't start. It cranks but won't start!

I have checked: Fuses, ECU Communcation OK (Only P0407 fault code in Engine ECU), Crank Sensor works, Fuel Supply to Injectors OK

I think ECU doesn't activate injectors but I don't know how check for pulse without oscilloscope. With iginition ON is there any voltage supply to check? I think injectors are Siemens Piezo.

What do you think?
Thanks!

Subaru EPC3 5.2019 (Europe)

$
0
0
Subaru EPC3 5.2019 (Europe)

[Image: YAHLvHU.png]

[Image: 3pHIX1O.png]

This comes with a video which is not of my making but maybe it can help guide you although you will see it doesn't exactly match up with what you have downloaded

I would recommend extracting the download to a safe place & install from there by running the Setup.exe from the Setup Folder, this will install it to your C drive

From the extracted folder you will also need the master.file
I put this master.file in a new folder, rename this to something simple so you can point the setup program towards it later
I placed this file on the root of C Drive

In the start menu you will find shortcuts for Subaru EPC, where you can run the components such as setup to point to your master.file folder
Also of course 1) Retrieve Parts Number to run the EPC

I could not get this to work on Windows XP
Quote:Notes for XP:
The program requires Internet Explorer 10 or 11, I was unable to try IE9 so can't report on that, either way XP supports none of these (IE8 being the last IE working with XP)

I tried also Chrome & Firefox-52.9 (last version supported for XP) neither of these worked either

It is possible to have the older Subaru-Fast II installed along side this new version to give you access to older vehicles

Install Subaru-Fast II in the same way as you would normally but change the install location like shown in this image, you will have both programs represented in the Start Menu when installation is completed

[Image: 6HsZE72.png]



Password = auto-professionals.co.uk
Subaru EPC3 5.2019.txt
File Type: .txt
Downloaded: 0 times
Size: 50 bytes

Subaru EPC3 5.2019 (Europe)

$
0
0
Subaru EPC3 5.2019 (Europe)

[Image: YAHLvHU.png]

[Image: 3pHIX1O.png]

This comes with a video which is not of my making but maybe it can help guide you although you will see it doesn't exactly match up with what you have downloaded

I would recommend extracting the download to a safe place & install from there by running the Setup.exe from the Setup Folder, this will install it to your C drive

From the extracted folder you will also need the master.file
I put this master.file in a new folder, rename this to something simple so you can point the setup program towards it later
I placed this file on the root of C Drive

In the start menu you will find shortcuts for Subaru EPC, where you can run the components such as setup to point to your master.file folder
Also of course 1) Retrieve Parts Number to run the EPC

I could not get this to work on Windows XP
Quote:Notes for XP:
The program requires Internet Explorer 10 or 11, I was unable to try IE9 so can't report on that, either way XP supports none of these (IE8 being the last IE working with XP)

I tried also Chrome & Firefox-52.9 (last version supported for XP) neither of these worked either

It is possible to have the older Subaru-Fast II installed along side this new version to give you access to older vehicles

Install Subaru-Fast II in the same way as you would normally but change the install location like shown in this image, you will have both programs represented in the Start Menu when installation is completed

[Image: 6HsZE72.png]



Subaru EPC3 5.2019 (Europe).rar
File Type: .rar
Downloaded: 0 times
Size: 21.5 KB

XE (X760 manual

VW Scirocco 2011 Parametrization Bixenon Headlight File

$
0
0
Hi,

I'm retrofitting 2015 Bixenon to 2011 Scirocco which have halogen light from factory.
On that moment LED DRL are 100% functional like from factory.
But i have problem with used AFS module which have Tiguan dataset.
Maybe somebody have. xml file from 2015 Scirocco Bixenon with cornering?

KIA Sorento 2006 2.5 CRDi NON Start

$
0
0
Hello.
I have problem with Sorento BL from 2006 year and 2.5 WGT engine.
The case is it cutted off during drive and now engine can't start.
No DTC codes, fuel on rail 270bar during cranking, about 280rpm during cranking.
Is meens not to open injectors at all, it works on starter spray. No any DTC from IMMO and status is learnt.
Is there any INERTIA switch? I replaced crankshaft and camshaft sensors and no response. I cant see camshaft signal in GDS, there is no on list
Please for help.

Hi immo off citrent c4 2008 hdi

$
0
0
Hi can some some one remove immo from citrent c4 grand piccasso 2008
1.6 hdi
ecu is chip is 95160
ecu is bosch edc16c34
citreon c4 hdi.zip
File Type: .zip
Downloaded: 0 times
Size: 906 bytes

Hyundai i40 TPMS Deactivation

$
0
0
The Tire Pressure Monitoring System function of the Hyundai i40 can be deactivated?

Mileage Correction BMW E39

$
0
0
I have a BMW 5 series E39 1998 model. The speedo gauge and indicators had stopped working so i got a second hand unit from scrap yard. They look identical but the problem is i see the eeprom on the old cluster is a 93C56 and on the 2nd hand unit is a B58(93C66). Can someone please correct the mileage of this 2nd hand cluster as it is on 250280KM and I need it to be 092234KM please.bow
BMW 5 series 250280KM.rar
File Type: .rar
Downloaded: 0 times
Size: 413 bytes

FORD VCM OBD FOCOM 109

Daihatsu sirion not starting

$
0
0
Hello mates
i have a daihatsu sirion 2014 model in my shop.
it cranks but it does not start. engine light does not illuminates and i have no comms with ecm. checked all fuses and cables as much as i could, as well and eathpoints. i think it is ecm fault but i cannot find a replacement part to test.
engine code is 1KR-F3 and ecm part number is 89560-B1G30. i could not find a descent wiring diagram. is there any guidanance or a possible solution?
thanks

[Request] Audi RS5 Coupe Quattro 2015 4.2 Map Sensor Wiring Diagram

$
0
0
VIN: WUAC6AFR4FA901918
Engine: CFSA

Please I need help, with relation to MAP sensor harness connector wiring coding.
This car came with the wire going to the sensor cut off, so I need the wiring connection entering into the sensor, so that I can join another wire to the main.

Power steering on Expert 3

$
0
0
Hello all
I have a peugeot expert 3 (tepee) here and requires a new electric power steering unit (under wheel arch).
I have bought one from a local factors and it is a new HPI unit, does it need to be programmed or is it just plug and play?
Do have lexia hereit needed can i do it with this or is it a dealer job.

Old unit has fluid leaking from the main electrical plug and no comms with lexia.

thanks for any help

I Need PIN Code For Peugeot Partner [SOLVED!]

$
0
0
Can I have the pin for VIN: VF3xxxxxxxxxxxxxx

Ford Focus III 1.0 Ecoboost DTC P2188

$
0
0
I have a friend who has this Focus III 1.0 Ecoboost with P2188 fault.
He has had it in to the dealer and they told him it needed a new O2 sensor which was replaced and if the fault comes back, try another O2 sensor until you get one that works! bigsmile2 I can't believe this, anyway the fault has come back and asked me to look at it.
I'm not going to fit another O2 sensor because I know he fitted a Bosch sensor, so can't see that been faulty.
The car can go for a week before the light comes on.
Anyone have the correct procedure for checking this fault please?
I'm supposed to be looking at this on Saturday morning and hope I am for armed with proper information. beer
Vehicle details_YC62AUR.pdf
File Type: .pdf
Downloaded: 0 times
Size: 71.89 KB


I Need PIN Code For Citroen Xsara Picasso

$
0
0
Hi AP’s.
Could you generate this pin code for me please?
VF7CH6FZB39317035
Thanks a lot in advance.
Best regards.

[Request] Nissan GT-R 2017 Active Pop Up Hood Wiring Diagram

$
0
0
Hello.
I am looking for wiring diagram and service information about Nissan GT-R 2017 pedestrian protection active pop up hood.
Could anybody share?
Thank you.

Peugeot 307 2006 1.6 HDi DTC's P1403 & P1404

$
0
0
Hello Guys.

Peugeot 307 1.6HDi 2006
VIN: VF33C9HXC84586713

I am working on this Peugeot 307, it has faults codes:
P0401 Air Circuit
I think this fault is related to EGR. I plan to blank off the EGR.
P1403 1 additional heating circuit
P1404 2 additional heating circuit

I have not a clue as to what these faults mean and what I need to check/change.
I cannot seem to locate the 02 Sensor on this vehicle, does it even use one?
Please advice me.

Kind Regards.

YAMAHA XV 400 VIRAGO

$
0
0
Good morning,this is my old dear bike and I have problem with wiring.Does anyone have manual for this model-it is about 1998?Thanks in advance....

Psa MEV 17.4.2 Virgin

$
0
0
Hi guys ,

can anyone help with virgin file or immo off for this citroen ds3 Mev17.4.2
I have tried with what i have and no joy..

many thanks
ds3_mev17.rar
File Type: .rar
Downloaded: 10 times
Size: 647.42 KB

Viewing all 7485 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>