Hi all!
OK, Saab 9-3 2003 Areo.
Dash Display came up with steering lock fail key would not turn on.
Plugged Delphi Diagnostics in and read loads of codes and there is a test wear you can activate the steering lock to remove a stuck key did this car was OK for 5 mins the flagged up the steering lock sign I replaced the ignition housing unit with a known good one and yet again car was OK for 5 or 10 minutes the fail on the display steering lock so I am now gonna replace the steering lock unit squire box what i need to no can I swap the data from one to the other as i will be using a used unit.
Then if this fails i be looking to swap the CIM I suppose.
OK, Saab 9-3 2003 Areo.
Dash Display came up with steering lock fail key would not turn on.
Plugged Delphi Diagnostics in and read loads of codes and there is a test wear you can activate the steering lock to remove a stuck key did this car was OK for 5 mins the flagged up the steering lock sign I replaced the ignition housing unit with a known good one and yet again car was OK for 5 or 10 minutes the fail on the display steering lock so I am now gonna replace the steering lock unit squire box what i need to no can I swap the data from one to the other as i will be using a used unit.
Then if this fails i be looking to swap the CIM I suppose.