Hi guys,
I have problem with Citroen C5 2006 year engine RFJ. Clients drive to me with problem with misfire and car goes off while driving.
We find that coolant sensor was leaking and the electric bundle of liquid got into the injection calculator. We replaced the sensor we cleared the injection calculator and changed wires with liquid. We learned throttling and The car rode for two days without any problems. After that the problems returns The car goes out at slow speed, the engine runs unevenly.
Errors:
Pemament P0341 Cylinnder reference sensor signal - short circuit to positive short circuit to negative open circuit.
Intermittent P0012 and P0011.
There was also error in Cylinder 1 but we move injector and spark plug to 2 and for now there is no error.
Wires from ECU to sensor - OK.
Oscillator show good signal from sensor.
The customer replaced the ignition coil on another service but I do not know if it is correct.
The car sometimes starts after 4 seconds.
My suspicions: Injection Calculator or variable timing phases.
For help I would be grateful.
I have problem with Citroen C5 2006 year engine RFJ. Clients drive to me with problem with misfire and car goes off while driving.
We find that coolant sensor was leaking and the electric bundle of liquid got into the injection calculator. We replaced the sensor we cleared the injection calculator and changed wires with liquid. We learned throttling and The car rode for two days without any problems. After that the problems returns The car goes out at slow speed, the engine runs unevenly.
Errors:
Pemament P0341 Cylinnder reference sensor signal - short circuit to positive short circuit to negative open circuit.
Intermittent P0012 and P0011.
There was also error in Cylinder 1 but we move injector and spark plug to 2 and for now there is no error.
Wires from ECU to sensor - OK.
Oscillator show good signal from sensor.
The customer replaced the ignition coil on another service but I do not know if it is correct.
The car sometimes starts after 4 seconds.
My suspicions: Injection Calculator or variable timing phases.
For help I would be grateful.