Good evening Professionals! ![hi]( "hi")
As someone followed this tool update logs then could see that is coming to be better from time to time.
What is your personal experiences with the Russian PCMFlash?![thinking]( "thinking")
How safe to use it? How can work stable with EDC/MEDC17?
I gathered couple of information about the PCMFlash here, in the comments We can continue the information with personal experiences.
![[Image: PCMFlash_L.png]]()
PCMflash is an integrated software solution intended for reprogramming ECU's and TCU's of VAG, Ford/Mazda, Mitsubishi, Nissan/Infinity, Subaru, Honda/Acura, Hyundai/Kia, Renault, Toyota/Lexus and other vehicles. There are universal modules Denso SH705x Bootloader and BSL TriCore. It supports work via ADS adapter (version 1, not for all ECU's) as well as via any J2534-compatible adapter if there are appropriate drivers and libraries. The tool has been tested with OpenPort 2.0, Mongoose JLR, MongoosePro JLR, Teradyne GNA600 (VCM 1), Mazda VCM 2.
![[Image: OW_N1ZviBV4qESbIU4kVN3962fFFdKGT.png]]()
The software is marketed on a module basis and has simple and clear interface. The Guardant dongle is used for the protection from unauthorized access. It supports flashing both backup (vbf) and binary (bin) files. When flashing binary files checksum verification and correction is available for most of the modules. Conversion from VBF/GDS into BIN is supported if the ECU doesn’t support reading. Most modules support checksum verification and correction as well as VID transfer (if needed) while flashing binary files.
Latest version is: 1.2.1
1st Experience By Mr. Kmpg![bow]( "bow")
Land Rover Freelander II 2016 2.0 Diesel ECU Clone
ECU Label: Picture is Here!
As someone followed this tool update logs then could see that is coming to be better from time to time.
What is your personal experiences with the Russian PCMFlash?
How safe to use it? How can work stable with EDC/MEDC17?
I gathered couple of information about the PCMFlash here, in the comments We can continue the information with personal experiences.
![[Image: PCMFlash_L.png]](http://chiptuningshop.com/wp-content/uploads/2018/02/PCMFlash_L.png)
PCMflash is an integrated software solution intended for reprogramming ECU's and TCU's of VAG, Ford/Mazda, Mitsubishi, Nissan/Infinity, Subaru, Honda/Acura, Hyundai/Kia, Renault, Toyota/Lexus and other vehicles. There are universal modules Denso SH705x Bootloader and BSL TriCore. It supports work via ADS adapter (version 1, not for all ECU's) as well as via any J2534-compatible adapter if there are appropriate drivers and libraries. The tool has been tested with OpenPort 2.0, Mongoose JLR, MongoosePro JLR, Teradyne GNA600 (VCM 1), Mazda VCM 2.
![[Image: OW_N1ZviBV4qESbIU4kVN3962fFFdKGT.png]](http://ecutools.eu/assets/11a2ad3f/OW_N1ZviBV4qESbIU4kVN3962fFFdKGT.png)
The software is marketed on a module basis and has simple and clear interface. The Guardant dongle is used for the protection from unauthorized access. It supports flashing both backup (vbf) and binary (bin) files. When flashing binary files checksum verification and correction is available for most of the modules. Conversion from VBF/GDS into BIN is supported if the ECU doesn’t support reading. Most modules support checksum verification and correction as well as VID transfer (if needed) while flashing binary files.
Latest version is: 1.2.1
1st Experience By Mr. Kmpg
Land Rover Freelander II 2016 2.0 Diesel ECU Clone
ECU Label: Picture is Here!
(Yesterday 12:26 PM)kmpg Wrote: Here tried and tested by me by chance 100% work PCMFlash.
This ECU cloned as VAG MEDC17 ECU without opening. Confirmed car running perfect.
Regards.
Kmpg