Hi all
I have this car with starting problems.
It does not start from the first attempt. Starts from second or third.
When it does not start it has DF116 fault-finding Camshaft sensor circuit coherence.
When it does not start the rail pressure and engine rmps are as specified, but there is no pulse to the injectors.
Checked so far: camshaft sensor- brand new, wiring to ecm tested and it is ok, timing checked with locking tools- all ok.
On the signal wire of the sensor at cranking I have around 6V, when car start I have around 9V.
I suspect the ecu (Delphi DDCR) as the problem, but it is very hard to open it without breaking it.
Any ideas are welcome!
BR
I have this car with starting problems.
It does not start from the first attempt. Starts from second or third.
When it does not start it has DF116 fault-finding Camshaft sensor circuit coherence.
When it does not start the rail pressure and engine rmps are as specified, but there is no pulse to the injectors.
Checked so far: camshaft sensor- brand new, wiring to ecm tested and it is ok, timing checked with locking tools- all ok.
On the signal wire of the sensor at cranking I have around 6V, when car start I have around 9V.
I suspect the ecu (Delphi DDCR) as the problem, but it is very hard to open it without breaking it.
Any ideas are welcome!
BR