Help on replacing Locks and Immo on 11/2016 Land Cruiser Prado KDJ150L-GKAEYV
Hello mates,
and happy new year!
While waiting for the complete download of Toyota EPC 7.2019 Full Version, that will take some time because of the slow speed of the internet in my region.
Can someone kindly help me to build up an estimate asked by an insurance company, after the owner of a brand new car (less than 1000km) has seen his original smart key stolen on top his desk in his office.
The owner have secured his car with a steering wheel lock
He wants his car to be resetted to the original state with Original Toyota genuine parts.
Everything should be replaced to avoid a potential stolen of the car later on.
Everything will be ordered from Toyota and ready to start after installation using TIS.
If necessary the VIN can be given by PM, just ask for it.
Here are my findings gathered from https://www.toyodiy.com/parts/p_G_201611...l?hl=69503
- 01 unit of 69503: Cylinder Set Lock (with a new key code or bitting code)
including 01 69052: Cylinder door lock, LH, 01 unit of 69056A: of Glove Compartment Lock, 01 unit of 69597: Spare Wheel lock, 02 units of 69503B: KEY CUT (also known as 69515-30310)
- 02 units of 89904B: Transmitter Sub-Assy, Electrical Key
- 01 unit of 89990A: Computer Assy, Smart key
- 01 unit of 89784: Computer Immobilizer Code
Am I right with this?
Best regards
Hello mates,
and happy new year!
While waiting for the complete download of Toyota EPC 7.2019 Full Version, that will take some time because of the slow speed of the internet in my region.
Can someone kindly help me to build up an estimate asked by an insurance company, after the owner of a brand new car (less than 1000km) has seen his original smart key stolen on top his desk in his office.
The owner have secured his car with a steering wheel lock
He wants his car to be resetted to the original state with Original Toyota genuine parts.
Everything should be replaced to avoid a potential stolen of the car later on.
Everything will be ordered from Toyota and ready to start after installation using TIS.
If necessary the VIN can be given by PM, just ask for it.
Here are my findings gathered from https://www.toyodiy.com/parts/p_G_201611...l?hl=69503
- 01 unit of 69503: Cylinder Set Lock (with a new key code or bitting code)
including 01 69052: Cylinder door lock, LH, 01 unit of 69056A: of Glove Compartment Lock, 01 unit of 69597: Spare Wheel lock, 02 units of 69503B: KEY CUT (also known as 69515-30310)
- 02 units of 89904B: Transmitter Sub-Assy, Electrical Key
- 01 unit of 89990A: Computer Assy, Smart key
- 01 unit of 89784: Computer Immobilizer Code
Am I right with this?
Best regards