Hi there working on a Peugeot 208 1.6 hdi 2015
vin VF3CC9HP0FT35392
car got abs fault abs pump has been changed old was damaged in crash , abs pump has been changed with matching part numbers car now starts
trying to do configuration off used pump but communication error checked all wiring it seems fine in
i am using diagbox 9,34 online when scanning the car it says abs pump not recognised but when you click on it you can see pump data etc and model name
in abs pump i get fault code bsi operating fault u1318 communication error.
i have checked can bus wiring for voltage seems fine on 2 sets off wire i get 2.5 volts
on other sets of can bus wiring there is no volts from the car side but voltage coming from abs pump around 9v
i have managed to get the abs pump light and traction control light off some caliabration off gyro sensor
but can't get the tmps light off
any help would be great thanks
vin VF3CC9HP0FT35392
car got abs fault abs pump has been changed old was damaged in crash , abs pump has been changed with matching part numbers car now starts
trying to do configuration off used pump but communication error checked all wiring it seems fine in
i am using diagbox 9,34 online when scanning the car it says abs pump not recognised but when you click on it you can see pump data etc and model name
in abs pump i get fault code bsi operating fault u1318 communication error.
i have checked can bus wiring for voltage seems fine on 2 sets off wire i get 2.5 volts
on other sets of can bus wiring there is no volts from the car side but voltage coming from abs pump around 9v
i have managed to get the abs pump light and traction control light off some caliabration off gyro sensor
but can't get the tmps light off
any help would be great thanks