Hey guys!
I have a 2005 mercedes sprinter ecm to clone (ecm replacement). engine 5cyl diesel, 2.7L
yesterday, I tried to read MCU via bdm pads with FGtech and with bdm100, but failed. (didn't saw the OBD option in my FGtech and in my AVDI)
my bdm100 seems to be missing the adapter for those bosch bdm pads, the only bdm adapter that I have which seems to fit (from FGtech) send wrong voltage at 3.3V pin (and maybe other voltage are off, not sure)... and to be honest, it is the first time I try to read those bosch ecm via bdm... so I'll need a bit help here.
both 12V are there with FGtech, but 3.3V read somewhere close to 1.5V.
here are a few picture of ecm and the adapter that I solder in place.
any input is welcome!!
thanks for your time!!!!
I have a 2005 mercedes sprinter ecm to clone (ecm replacement). engine 5cyl diesel, 2.7L
yesterday, I tried to read MCU via bdm pads with FGtech and with bdm100, but failed. (didn't saw the OBD option in my FGtech and in my AVDI)
my bdm100 seems to be missing the adapter for those bosch bdm pads, the only bdm adapter that I have which seems to fit (from FGtech) send wrong voltage at 3.3V pin (and maybe other voltage are off, not sure)... and to be honest, it is the first time I try to read those bosch ecm via bdm... so I'll need a bit help here.
both 12V are there with FGtech, but 3.3V read somewhere close to 1.5V.
here are a few picture of ecm and the adapter that I solder in place.
any input is welcome!!
thanks for your time!!!!
| 05 sprinter ecm.rar | ||
| File Type: |
 |
 |
| Downloaded: | 1 times | |
| Size: | 107.09 KB | |