Anyone got any experience with the keyless start on these? Vehicle only responds to remote locks. NO ignition lights with either key on start press.
Scanned RFA (keyless module in boot), brake, clutch, start switches all responding. IGN-NO, Start Relay -N0.
If I attempt to start a module initialization procedure (ie. re-sync) it detects both keys being within the vehicle. I aborted procedure here.
Doesn't appear to be a 'key found/valid' tab in RFA data screen.
I'm assuming it's detecting keys but no ignition request.
Two things I've found, at first NO faults in RFA now shows U0300 Internal control module software comparability. Possible Steering lock fault?
Thinking to 'module initialize' RFA, has anyone done this? Is the key programming procedure same as normal ie. INCODE/OUTCODE generator OK.
Thanks for any help...
Scanned RFA (keyless module in boot), brake, clutch, start switches all responding. IGN-NO, Start Relay -N0.
If I attempt to start a module initialization procedure (ie. re-sync) it detects both keys being within the vehicle. I aborted procedure here.
Doesn't appear to be a 'key found/valid' tab in RFA data screen.
I'm assuming it's detecting keys but no ignition request.
Two things I've found, at first NO faults in RFA now shows U0300 Internal control module software comparability. Possible Steering lock fault?
Thinking to 'module initialize' RFA, has anyone done this? Is the key programming procedure same as normal ie. INCODE/OUTCODE generator OK.
Thanks for any help...