Citroen Saxo Cup 1.6 120HP IAW 48P.2 ECU Pinout

Greetings fellow mates.

Have issue here with Saxo Cup MK2 1.6 VTS 120HP Magnetti Marelli IAW 48P.2 ECU as it had water intrusion and car won't start. It's not IMMO related because IMMO off had already been applied and the car was running before. PCB was all wet but has been properly cleaned and the moisture removed. Now in order for me to test it on bench would appreciate if any kind soul here could share the IAW 48P.2 with 3 plug pin description as S/W I have only shows MK1 (IAW1AP ECU) pinout description.
I've searched web to find nothing regarding pinout description for this IAW 48P ECU.
Also during cleaning process seem like an SMD capacitor ran away and not sure what capacitance it is nor polarity position.
PCB schematics would be also a major help so I may hunt it back in place Photo of missing SMD location on PCB attached.

BTW if there is a better auto info and repair SW guide to help me with this issue and future ones since the S/W that I have doesn't have all the info needed, would appreciate.

---

May have stumbled on something regarding pinout for Saxo IAW48P2 just now doing some more searching on the web, and decided to attach link here.
Will follow the instructions from the link and see if are what I was looking for.
But if anybody could share some more info regarding the same on previous post would appreciate.

IAW48P2.rar
File Type:
Downloaded:	5 times
Size:	3.3 MB