Hi, having fun with trying to read 24C64 chip, but need some help. Using Smelecom eeprom adapter, I can not read properly or write to the chip. I do not really know where I'm doing wrong so I gladly little support and help from people with more experience than me.
How do I know which one is the PIN 1 (no mark on the chip).
Smelecom asks for voltage setting, default, V3.71, this is right on the chip below?
I have desoldered the chip and tried many times to read out but I get the error message 3FFE - Data check error when trying to follow Smelecom instructions on writing new bin to the 24c64 chip. When soldering the chip back again everything works.
How do I know which one is the PIN 1 (no mark on the chip).
Smelecom asks for voltage setting, default, V3.71, this is right on the chip below?
I have desoldered the chip and tried many times to read out but I get the error message 3FFE - Data check error when trying to follow Smelecom instructions on writing new bin to the 24c64 chip. When soldering the chip back again everything works.
| comp.jpg | ||
| File Type: |
 |
 |
| Downloaded: | 16 times | |
| Size: | 285.28 KB | |