DS3 1.6 Hdi
Vin is: BW620610
Hi.
I have a customer complaining of misfires and throttle response. Been to several garages including the dealer, dealer said it's the injectors causing the problem. Customer has had injectors tested and found to be OK, but I can't verify this.
Anyway, it's in my workshop now with the following codes.
P1621 Control unit - Software redundancy fault at the injection (level 2)
P0263 Cylinder 1 - Resetting on injector outside tolerance
P0266 Cylinder 2 - Same as above
P0269 Cylinder 3 - Same as above
P2137 Measurement of accelerator pedal position incoherence of the tracks of the accelerator pedal.
P0222 Short circuit to earth to on signal from track 1
Had a quick look at wiring info and can't see any relation to accelerator pedal position and injectors.
Anyone had issues with these before? I'm thinking 5 volt reference is being pulled down inside issue causing other codes!
Vin is: BW620610
Hi.
I have a customer complaining of misfires and throttle response. Been to several garages including the dealer, dealer said it's the injectors causing the problem. Customer has had injectors tested and found to be OK, but I can't verify this.
Anyway, it's in my workshop now with the following codes.
P1621 Control unit - Software redundancy fault at the injection (level 2)
P0263 Cylinder 1 - Resetting on injector outside tolerance
P0266 Cylinder 2 - Same as above
P0269 Cylinder 3 - Same as above
P2137 Measurement of accelerator pedal position incoherence of the tracks of the accelerator pedal.
P0222 Short circuit to earth to on signal from track 1
Had a quick look at wiring info and can't see any relation to accelerator pedal position and injectors.
Anyone had issues with these before? I'm thinking 5 volt reference is being pulled down inside issue causing other codes!
